中国人妻一区二区三区精品,国产精品一区乱码在线观看,亚洲理论在线a中文字幕,精品国产女主播在线观看

Your Position: Home > Support > Service Center

How to solve the problem of emulsification and whitening of lubricating hydraulic oil

2019/12/19??????view:

Application of hydraulic oil:

1. Industrial hydraulic system

Hydraulic oil is suitable for various types of hydraulic systems in manufacturing and industry.

2. Mobile hydraulic transmission system

Hydraulic oil can be effectively used in mobile hydraulic equipment such as excavators and cranes.

3. Marine hydraulic system

It is suitable for marine hydraulic system recommended to use ISO HM hydraulic oil.

The sources of water in the hydraulic system are:

The water brought by the hydraulic oil production process has not been effectively removed, and the water vapor, rainwater or other water pollution sources in the process of oil storage and use have invaded. Allowable water content in hydraulic oil:

General system < 0.5%, oil may stop in the circuit and return to the oil tank < 0.1%, oil in some oil pressure pipelines does not return to the oil tank < 0.05%, precision instrument < 0.03%, and the factory water content of hydraulic oil produced by regular lubricant manufacturers is required to be < 0.03%.

Hazards of water in oil:

Accelerate the aging of oil products; produce sludge; reduce lubricity; corrode metals; produce rust.

There are three main indexes to inspect the water resistance of hydraulic oil in the specification of hydraulic oil:

Demulsibility - the ability of oil and water to form emulsions in two layers

Rust resistance - the ability of oil products to prevent rusting of metals in contact with them

Hydrolytic stability refers to the ability of oil to resist hydrolytic reaction when hydraulic oil is mixed with water

The hazards of water inflow in the hydraulic system are as follows:

The harm of water to the hydraulic system can react with the hydraulic oil to form acid, colloid and sludge, and water can also separate out additives in the oil; the main effect of water is to reduce the lubricity and dissolve in the micro of the hydraulic oil: it can react with the hydraulic oil to form acid, colloid and sludge, and water can also separate out additives in the oil; the main effect of water is to reduce the lubricity and dissolve in the micro water in the hydraulic oil It can accelerate the wear of high stress components. Only from the study of the fatigue life of mineral oil rolling bearing with water (100-400) × 10-6, the bearing life is reduced by 30% - 70%. Water can cause sticking of control valve, cavitation damage at pump inlet or other low pressure parts, corrosion and corrosion of metal.

There are three ways for water to enter the hydraulic system:

In case of mechanical failure, such as poor sealing, leakage of cooling coil causes water to enter the oil;

In the hot and humid climate, the fuel tank is brought in by breathing;

The working environment is humid, rain, snow and ice melting cause water pollution.

How to solve the problem of water inflow in the hydraulic system:

Strengthen the monitoring of water content in the oil; use the outdoor hydraulic equipment, Zui good use of weather proof tents; strengthen the system sealing measures, waterproof access. The oil tank breathing hole is equipped with a dryer;

For the hydraulic oil that has been emulsified and whitened, please don't worry. Zhongjing brand hydraulic oil dehydration demulsification and oil filtration function developed by our company can effectively solve this situation. After treatment, all indexes of the oil can be restored to the national standard, especially the water content can be controlled below 0.3%.

When the equipment is working, the oil will pass through a special filter with large amount of dirt to remove impurities. The contact area of the oil in the vacuum separator is increased to hundreds of times by using the special water separator and the personalized vacuum separator, which uses the hydrophobic technology and the principle of "cavitation". The "cavitation" system makes the evaporation surface area of the oil increase continuously, and the evaporation interface is constantly updated, which maximizes the oil travel in the vacuum system and the static water volatilization surface The water in the oil is vaporized and evaporated rapidly under the condition of low heat, high vacuum, large surface and high pumping speed, and then discharged by the vacuum system.

After vacuum vaporization and dehydration, the dry oil in the vacuum separator rises from negative pressure to positive pressure through the oil delivery pump. After fine filtration, the purified oil is discharged from the oil outlet to complete the whole oil purification process. This equipment adopts the physical principle to filter and dewater, and does not add any chemical additives in the process of treatment, and will not have any adverse effect on the oil products. Please feel free to use it. Friends in need can be at any time.

青青操在线免费手机视频| 少妇人妻精品一区二区三区| 欧美男性粗长粗大久久久| 欧美一区二区三区 在线| 国产亚洲精品美女啪啪啪| 在线观看国产色视频网址| 国产精品亚洲一区二区麻豆| 欧美精品亚洲精品日韩精品| 亚洲成年人电影在线观看| 成人无码区免费a∨网站| 伊人久久久久久久久香港| 久久精品无码一区二区无码| 手机在线不卡二区中文字幕| 欧美精品久久久久久久白浆| 欧美色一区二区三区图片| 国产无遮挡无码视频免费软件 | 在线欧美亚洲xxxxx| 久久精品免费久久久精品| 欧美精品亚洲精品日韩区一| 欧美人妻在线一区二区三区| 久久久久久国产精品日本| 99re视频网站在线观看| 亚洲综合精品| 最新亚洲人成无码WWW| 欧美精品午夜久久久久'久| 国产亚洲一区二区三区不卡| 亚洲综合五月天激动情网| 亚洲欧美另类精品在线观看| 兔女郎被啪出水在线视频| 91精品国产自在现不卡| 久久精品国产亚洲av高清| 国产精品你懂得在线观看| 成人s级片子在线观看网| 精品熟女少妇一区二区三区| 精品日韩欧美一区二区三区| 老司机在线精品视频播放| 色拍拍拍免费视频在线| 久久久久亚洲av滨崎真绪| 日本精品啪啪一区二区三区| 久久丁香五月天综合网| 野花社区www在线观看|